Spiralock® Ultrasonic Threaded Inserts for Tapered Holes
This version of Spiralock®’s threaded insert is designed for use in tapered holes, which allows for rapid and accurate alignment prior to installation.
The Ultrasonic Threaded Insert for Tapered Holes is installed with the use of high-frequency vibrations generating frictional heat at the metal-to-plastic interface. The plastic melts slightly and flows into the knurled serrations, barbs, and undercuts. The molten plastic will then re-solidify leaving the insert securely fit in place.
Ultrasonic installations of inserts offer higher torsional and pullout properties than cold press-fit methods.
Fast Facts:
- Designed for use in tapered holes.
- Ultrasonic installation.
- Superior torsional and pullout properties.
- For softer materials. Ideal for use with plastic.
- Made to order. Available in brass or stainless steel.
Thread Size | EDP # | Insert Style | A | E Dia. |
C Body Dia. |
Hole Size in Material | ||
---|---|---|---|---|---|---|---|---|
Min. Hole Depth | D | F | ||||||
2-56 | 94000 94001 |
1 2 |
0.115 0.188 |
0.141 0.141 |
0.123 0.112 |
0.155 0.228 |
0.118 0.107 |
0.123 0.123 |
4-40 | 94005 94006 |
1 2 |
0.135 0.219 |
0.172 0.172 |
0.157 0.146 |
0.175 0.259 |
0.153 0.141 |
0.159 0.159 |
6-32 | 94010 94011 |
1 2 |
0.150 0.250 |
0.219 0.219 |
0.203 0.190 |
0.190 0.290 |
0.199 0.185 |
0.206 0.206 |
8-32 | 94015 94016 |
1 2 |
0.185 0.312 |
0.250 0.250 |
0.230 0.213 |
0.225 0.352 |
0.226 0.208 |
0.234 0.234 |
10-32 | 94020 94021 |
1 2 |
0.225 0.375 |
0.297 0.297 |
0.272 0.251 |
0.265 0.415 |
0.267 0.246 |
0.277 0.277 |
¼-20 | 94025 94026 |
1 2 |
0.300 0.500 |
0.375 0.375 |
0.354 0.332 |
0.340 0.540 |
0.349 0.321 |
0.363 0.363 |
M3 x 0.5 | 94030 94031 |
1 2 |
3.80 6.40 |
5.56 5.56 |
5.16 4.83 |
4.82 7.36 |
5.05 4.70 |
5.23 5.23 |
M4 x 0.7 | 94035 94036 |
1 2 |
4.69 7.92 |
6.35 6.35 |
5.84 5.41 |
5.69 8.92 |
5.74 5.28 |
5.94 5.94 |
M5 x 08 | 94040 94041 |
1 2 |
6.70 11.10 |
8.33 8.33 |
7.82 7.19 |
7.72 11.54 |
7.70 7.06 |
8.00 8.00 |
M6 x 1.0 | 94045 94046 |
1 2 |
7.62 12.70 |
9.52 9.52 |
8.99 8.43 |
8.62 13.70 |
8.86 8.15 |
9.22 9.22 |
Important: Above Inserts are made to order and are available in brass or stainless steel. Please specify when ordering.
Notes: Dimensions for metric sizes are in millimeters.
Tolerances:
A, E, C | – Fractional ±.005 | Metric ±0.13 |
D, F | – Fractional ±.002 | Metric ±0.05 |